This month was a very exciting month for us. The SEMA automotive convention was this month, which allowed us to meet and hang out with all the industry leaders that we work with. Most importantly, we also unveiled a new LED conversion kit that is made with the highest quality materials we have ever seen in the industry. With this LED kit now available, we took no delay in test fitting it into our 2005-2010 Scion TC Meng fog lights. With just a little patience, our new LED kits fit beautifully into these fog lights and provided increased performance over halogen bulbs.
Difficulty: 1 out of 5. Time: Roughly 10 minutes. Tools: Philips screwdriver. A wire cutter, sand paper, or simple filer.
Remove the rubber boot and H3 bulb behind the fog light. The rubber boot simply pulls off and the bulb is held on by one Philips screw.
Once bulb is removed, carefully sand down the 3 circle bumps shown by the red arrow. Picture shown has the bumps already sanded down. You can also use a wire cutter and cut the bumps off as well. These three raised bumps provide a secure fit when using halogen bulbs. Due to the thicker bulb base from the LED, you will need to sand these down. The underside of the square tab (shown by yellow arrow) can also be very slightly shaved if necessary.
The H3 LED bulb base can be removed from the actual bulb (red arrow). Due to the size of the heatsink on the LED, you will need to remove this bulb base and install first into the fog lamp. To remove this piece, you simply push down and twist counter clockwise to unlock.
Insert the H3 bulb base into fog lamp. With the 3 bumps sanded down (step 2), the bulb base should now evenly fit into the fog lamp bulb slot. It is very important to not use excessive force when installing this bulb base. If the H3 bulb base does not easily fit into the fog lamp slot, check to see if the tab is getting in the way and carefully file down if necessary.
Cut down the rubber boot about a 1/2 inch from the top as shown (measured at the very top, including the small outlet).
Insert the LED bulb back into its base. Make sure to align the tabs on the bulb and base as one tab is larger than the other. Insert LED bulb and twist to lock. The fog lights are now available for install. Make sure to connect the electrical driver and the H3 plug and play harness onto the LED bulb. The fog lights can now be installed onto the vehicle as normal.
Photo of Scion TC with the Meng LED kit in both low beams and fog lights:
We will be closed during the week of October 31st to November 4th due to the SEMA automotive convention. During this time, all Meng branded items will not be shipped out until November 4th. Certain orders may still be able to go out during this week. All customer service calls will go to our personal [...]
In today's blog post we are going to compare the main differences between our Meng Motorsports corner Scion TC fog lights and the competitor fog lights on the market. There are several excellent fog light options for the Scion TC and we are going to explain certain advantages and disadvantages of going with our Meng [...]
Congratulations on your purchase of one of the highest quality LED bulbs available. We take a lot of pride in our Meng Motorsports LED bulbs and are confident you will be just as happy as we are with these products. The demonstration vehicle in this install guide is a 2007 Scion TC with 9006 bulbs. Please [...]
Thank you for purchasing a Meng Motorsports HID Kit. Prepare to enjoy a more luxurious ride with increased visibility whether you drive in rain, snow, or night. HIDs have been proven to be extremely brighter than regular halogen bulbs. The demonstration vehicle in this install guide is a 2007 Scion TC with 9006 bulbs. Please refer to your owners [...]
Thank you for purchasing our Meng Motorsports fog light kit for your 2005-2010 Scion TC. Considered as one of the best aftermarket fog lights for the TC, you will enjoy not only an increase in style, but also an increase in visibility during inclement weather. The install for these fog lights are completely plug and [...]
We had the fortunate chance to get these Scion TC coilovers from Tein on our stock order this week. In todays blog post, we are going to discuss the basic differences of most coilovers, and the advantages and disadvantages of the Street Basis coilovers compared to others. No dyno charts or track time differences here, [...]
Words cannot explain how much we love this exhaust system for the 2005-2010 Scion TC. During a time where most manufacturers actually discontinue exhausts for the TC1, Agency Power continues to produce their units without hesitation as of yet. Throughout the years we have been steadily selling these exhausts to no surprise. Its just that [...]
We are proud to introduce the Yonaka Catback Exhaust system for the Scion FRS and Subaru BRZ. Starting at just $295.00, never before have we seen a quality exhaust this affordable. No shortcuts were taken in producing this exhaust. Fully designed and tested at their shop in Canada, this exhaust has exceptional craftsmanship. Yonaka has [...]
Happy Thanksgiving everybody! We are starting our sale a bit early and will have it until the end of Monday 11/30/2015. We looked at our most popular selling items and discounted them even more. Please visit our Holiday Sale page for a complete list of our Black Friday and Cyber Monday sales. **Certain Items Worth Noting** BC [...]